HOW TO - 14MM HEX MOD:

Thanks to Mnster at www.rccrawler.com for this great mod.

Now you can have alumn hex's on your CVD's with a 14mm Hex.

Here is how they work.

First you will need these. These are LST2 14mm Adaptors.

The pin in the CVD stub has to be drilled out for the overly beef LST pin. The stub axle then has to be cut flush with the hex.

I made a spacer, but you could use washers.

The LST adaptor had to be grooved for the O-ring

Mounted up

As of right now, almost everything is on Special Order. Please E-Mail to check stock status. Items only take a couple of days to get.

From here on out I'm going to mainly do the following kits. All my Delrin Chassis Kits, Custom RTR Kits, Custom Turn Key RTR's, Custom ARTR's, and ARTR and RTR kits I already have listed here.

Full Electronic Kits for any Crawler. Rc4wd Scale Item Packages, Rollers and a few other things...